The instructions below are to be followed only if you are downloading this product separately and trying to integrate with a z/OS base that is different from the ADCD z/OS V2R2 May 2016 Edition.

  • Obtain WAS 8.5.0 by downloading:

    HTTPD1.ZT301.TDL.ADCDB2.VB2W851.BIN

    HTTPD1.ZT301.TDL.ADCDB2.VB2W852.BIN

    HTTPD1.ZT301.TDL.ADCDB2.VB2W853.BIN

    HTTPD1.ZT301.TDL.ADCDB2.VB2W854.BIN

    HTTPD1.ZT301.TDL.ADCDB2.VB2W855.BIN

    HTTPD1.ZT301.TDL.ADCDB2.VB2W856.BIN

    HTTPD1.ZT301.TDL.ADCDB2.VB2W857.BIN

    The bin files are in gzip format for use under zPDT. The bin files will need to be renamed to b2w851.gz, b2w852.gz, b2w853.gz, b2w854.gz, b2w855.gz, b2w856.gz and b2w857.gz. Install the b2w85*.gz file by using the following commands under zPDT: 

    gunzip -c b2w85*.gz > /userdir/b2w85*.bin

  • Add the volumes b2w851, b2w852, b2w853, b2w854, b2w855, b2w856 and b2w857 to the zPDT definition(devmap) file and IPL your z/OS system.
  • Follow the steps given below to setup SMS constructs required for WAS V8.5, using ISMF. 

    
Step 1:

    
Enter m.2 - ISMF Primary Option Panel
Enter 0.0  - User Mode Entry
Enter 2 -  Storage Administrator Mode
F3 three times go to ISPF primary option panel
(In order to set Storage Administrator Mode you must leave ISMF panel
 and then return)


    
Step 2:

    
Enter m.2 - ISMF Primary Option Panel
Select 4 - Data Class
CDS Name...  'SYS1.SCDS'
Data Class Name... DCEXTEAV
Select 3 - Define
Use all the defaults on Data Class Define Panel
F3 to End and Save
F3 to ISMF Primary Option Panel


    
Step 3:

    
Select 5 - Storage Class
CDS Name...  'SYS1.SCDS'
Storage Class Name... SCEXTEAV
Select 3 - Define
Use all the defaults on Storage Class Define Panel
F3 to End and Save
F3 to ISMF Primary Option Panel


    
Step 4:

    
Select 6 - Storage Group
CDS Name...  'SYS1.SCDS'
Storage Group Name... SGEXTEAV
Storage Group Type... POOL
Select 3 - Define
Use Guaranteed Backup Frequency  . . . . . . NOLIMIT
Use all other as defaults on Storage Group Define Panel
F3 to End and Save
F3 to ISMF Primary Option Panel


    
Step 5:

    
Select 6 - Storage Group
CDS Name...  'SYS1.SCDS'
Storage Group Name... SGEXTEAV
Select 5 - Volume
Enter the following volumes in prefix column and use option 2 for define

XXW853
XXW857

where XX is the volume serial prefix in your edition

Use all default values on Volume Status Define Panel
F3 to End and Save
F3 twice to exit ISMF


    
Step 6:

    
Enter m.2 - ISMF Primary Option Panel
Enter 7 - ACS Application
Enter 2 - Translate
SCDS Name... 'SYS1.SCDS'
ACS Source Data Set... 'SYS1.SMS.CNTL'
ACS Source Member... DB2STORC
Enter - Should get message 'Translation Successful'
ACS Source Data Set... 'SYS1.SMS.CNTL'
ACS Source Member... DB2STORG
Enter - Should get message 'Translation Successful'
F3 to previous panel
Enter 3 - Validate
Enter - Should get message 'Successful Validation'
F3 thrice to ISMF Primary Option Panel


    
Step 7:

    
Enter 8 - Control Data Set
CDS Name... 'SYS1.SCDS'
Enter 5 - Activate
Enter '/' to Perform Activation
Should get a message 'Activation Scheduled'
Enter - Should get below message

?IGD008I NEW CONFIGURATION ACTIVATED FROM SCDS SYS1.SCDS?

F3 thrice to ISPF Primary Option Panel

  • Connect the new WAS catalog 

    //CAT     EXEC PGM=IDCAMS
//SYSPRINT DD  SYSOUT=*
//SYSIN    DD  *
  IMPORT CONNECT OBJ((USERCAT.Z22B.WAS850 -
         VOL(B2W851) DEVT(3390))) -
         CATALOG(CATALOG.Z22B.MASTER) << your master cat here

  • Build aliases using the following JCL: 

    //    EXEC PGM=IDCAMS
//SYSPRINT DD SYSOUT=*
//SYSIN  DD *
 DEF ALIAS (NAME(WAS850    ) REL(USERCAT.Z22B.WAS850)) -
                                 CAT(CATALOG.Z22B.MASTER)

  • Update the parmlib member BPXPRMxx to specify the mountpoints. 

    MOUNT    FILESYSTEM('WAS850.SBBOZFS')
         MOUNTPOINT('/usr/lpp/zWebSphere/V8R5/')
         TYPE(ZFS)
         MODE(READ)

MOUNT    FILESYSTEM('WAS850.SDYZZFS')
         MOUNTPOINT('/usr/lpp/zWebSphere_SPS/V8R5/')
         TYPE(ZFS)
         MODE(READ)

MOUNT    FILESYSTEM('WAS850.SHAPZFS')
         MOUNTPOINT('/usr/lpp/IHSA/V8R5')
         TYPE(ZFS)
         MODE(READ)

MOUNT    FILESYSTEM('WAS850.SIMRZFS')
         MOUNTPOINT('/usr/lpp/InstallationManagerRepository/V8R5')
         TYPE(ZFS)
         MODE(READ)

MOUNT    FILESYSTEM('WAS850.REPRO')
     MOUNTPOINT('/usr/lpp/InstallationManagerRepository/V8R5/TOOLS')
         TYPE(ZFS)
         MODE(RDWR)

MOUNT    FILESYSTEM('WAS850.SIWOZFS')
         MOUNTPOINT('/usr/lpp/zWebSphere_Plugins/V8R5')
         TYPE(ZFS)
         MODE(READ)

MOUNT    FILESYSTEM('WAS850.S0W1.XFCELL.XFNODE1.CONFIG.ZFS')
         MOUNTPOINT('/websphere/v8r5/xfcell/xfnode1')
         TYPE(ZFS)
         MODE(RDWR) PARM('AGGRGROW') NOAUTOMOVE

MOUNT    FILESYSTEM('WAS850.S0W1.XFCELL.XFDMNODE.CONFIG.ZFS')
         MOUNTPOINT('/websphere/v8r5/xfcell/xfdmnode')
         TYPE(ZFS)
         MODE(RDWR) PARM('AGGRGROW') NOAUTOMOVE

  • ADD the new WAS catalog to parmlib member COFVLF00.. 

    CLASS NAME(IGGCAS)
      ...
      EMAJ(USERCAT.Z22B.WAS850)

  • Make appropriate changes to procedures in your user proclib.