Db2®

• Effective with the December 2023 edition of ADCD z/OS, Db2 Change Management Solution Pack for z/OS (5655-CH1) will be removed and replaced by Db2 Administration Tool for z/OS (5698-AT3).
• Db2 13 now supports encryption of Db2 data with z/OS DFSMS data set encryption, and function level 506 introduces new policy controls for managing of key labels. For more information go to DB2 Administration Tool(DM) and DB2 V12 with V12R1M506

The option to use Secure SSL/TLS for TN3270 has been provided with this ADCD release. We know the newer versions of PCOMM, after V6.0, will not require any special action to use SSl/TLS and most third party emulators will work as well. We believe the most current version of PCOMM is V13 and it will only run on Windows 10 and above. If you still have the Windows 10 box you should try it out. If you are using a third party TN3270 emulator then you should check with owner of the third party TN3270 emulator for assistance with implementing SSl/TLS.

USER.** libaries changed to use the ADCD release level &SYSVER, USER.Z31B, to provide uniqueness based on ADCD release level.

Console member in PARMLIB updated to allow Health Checker messages to roll off.

ADCD is only available to ISVs who are enrolled in the IBM Z On-premises Development (zOPD) Program with a current, valid contract and existing zPDT license/serial number.

• ISVs wishing to join the zOPD Program may apply for admission at https://zopd.dfw.ibm.com/apply/.
• Existing zOPD Program participants who need support accessing the latest download (including password resets) may contact zTech@us.ibm.com.
  • List ADCD 3.1 May 31 2024 Request in the subject line.
  • Include your company name and zPDT serial number in the email's body.
• For technical issues or questions, please post a new message in the Discussion tab of the IBM Z Dallas ISV Center Community site at http://ibm.biz/DallasISVCommunity.

License

The ADCD is a customized bundle of z/OS and related products. It is not an IBM program product and is not supported as a product. The intent of the ADCD is to allow a user a way to quickly implement a z/OS system in order to concentrate on application development. In general choice of parameters and customizations are default install options with some changes due to user experiences.

Approved ISVs with zPDT based systems will need to have agreed to the ADCD license agreement, and have a signed System z Developer Discount contract on file with IBM prior to receiving a copy of the z/OS ADCD. All license and agreements are done through the System z Developer Discount offering.

System Requirements

The currently supported ADCD environments is:

• z/OS 3.1 May 2024 Edition under zPDT

For information on the zPDT Version 10.1 release, please see the ISV IBM zPDT Guide and Reference

The z/OS ADCD packet is in Linux gzip format. The *.gz files are gzipped directly from the 3390 images running under zPDT.

Downloads

The ordering process to obtain z/OS, CICS, DB2, IMS, WAS and Tivoli Omegamon in gzip zpdt formats, as well as their middlware versions, is found at Subsystem Downloads - Information

Once you have ordered ADCD and received the authenication package, proceed to the ADCD Download Authentication page

Customization Help and Location of Product PGMDIR's

A great deal of effort has gone into the ADCD to customize the products. However, you may find some products that are not fully customized or are customized with options that you need to change. Included in this release, are files in the format of p.SVSC.l where p=product HLQ and l=library name. The purpose of these files is to provide PGMDIR's, README, and INSTALL instructions. This ADCD is built from a driver system that uses different volume and library names. Thus, you will notice that the names referenced in the SVSC files are different than the ADCD. You may need to make translations on names to implement in the ADCD.

Back to Table of Contents

NOTE: As of ADCD z/OS 3.1 May 2024 Edition, distribution via DVDs has been discontinued and all future distribution of ADCD Editions will only be available via download.

The ADCD Release Guide z/OS 3.1 May 2024 Edition, also available on the download site, contains more information about this edition. It also provides some additional notes and tips to effectively manage the ADCD system.

The following Workflow Provisions have been added to the Market Place:

• CICS v6.1

The following products have been added:

• IBM Z Development & Test Environment Enterprise Edition V14.12.1
• IBM Open Enterprise SDK for GO V1.22
• IBM Z Multi-Factor Authentication V2.3.0
• IBM Application Delivery Foundation for z/OS V4.0.3
• IBM Open Enterprise SDK for Python V3.12.0

The following products have been updated to PUT2403 / RSU2403

• z/OS 3.1 and all incorporated products that provided maintenance at the above stated level.

All of the z/OS base, z/OS products, and most middleware volume sizes have been increased to mod-9 (10,017 cylinders) to provide more free space for expansion. Additionally, volumes for Db2 V13 and Installation Manager have been increased to 18,000 and 20,000 cylinders respectively.

Back to Table of Contents

• The screens for VT Terminal and TN3270 on Zowe Desktop fail to connect. A case has been opened to seek resolution.

Back to Table of Contents

Back to Table of Contents

The following guidelines will make it easier for you to replace this level of system software with new levels built the same way.

Only IBM-supplied system software should reside on B3xxxx volumes except for B3SYS1. B3CFG1 contains RACF, IPL, and catalog datasets that are user dependent.

The ADCD does not contain a generalized migration utility or process. Each user has unique requirements. It is recommended that you build a migration plan based on your unique needs. The ADCD does have some assistance. The ADCD uses a system of concatenated libraries (see below) The highest level of concatenation is USER.Z31B.xxxxxx The ADCD distributes these libraries empty. It is recommended that the user place changes or overrides in these libraries. It is further recommended that the USER.Z31B.xxxxxx libraries be backed up regularily. When a new ADCD release is installed the USER.Z31B.xxxxxx libraries can be copied from backups to the new USER.Z31B.xxxxxx libraries to provide assistance in migration of programs and parameters.

The ADCD is distributed with a standard library concatenation for the following:

• LINKLST
• PROCLIB (including TSO procedures)
• CLIST
• ISPPLIB (TSO panels)
• LPALIB
• PARMLIB
• VTAMLST
• VTAMLIB
• VTAM source

The configured order of concatenation is user, ADCD developers, and z/OS system datasets. For example, the LINKLST concatenation would be as follows:

• USER.Z31B.LINKLIB
• ADCD.Z31B.LINKLIB
• SYS1.LINKLIB

USER.Z31B.xxxxxx libraries have all been built on B3CFG1 which is the only volume that should contain user data.

USER.Z31B.xxxxxx will not be changed by ADCD or System processes; thus, user updates in USER.Z31B.xxxxxx will be retained between release levels. ADCD.Z31B.xxxxxx libraries are allocated on B3SYS1 and are the libraries that are used by ADCD developers. No RACF rules exist on these libraries; however, changes to these libraries could destroy customization necessary to bring up many products. SYS1.xxxxxxx libraries should NEVER be updated by users or ADCD development. System libraries should ONLY be updated through SMP/E install, maintenance processes, or like processes.

NOTE: Changes to System libraries or ADCD pre-customization may corrupt your system and prevent or delay IBM support activites.

The correct procedure for a user update to system data is to:

• Copy the system data from SYS1.xxxxx or ADCD.xxxx to USER.Z31B.xxxxxx
• Edit, compile, or run user program against the USER.Z31B.xxxxxx item
• Re-ipl, recycle system service, or re-logon to TSO

Removing a user update would be the reverse of the above procedure.

Back to Table of Contents

NOTE: JES2 should be COLD started the FIRST time you bring up the system.

Back to Table of Contents

Back to Table of Contents

Back to Table of Contents

All the products on the ADCD consist of maintenance that is in a closed status. A PTF that is still in open status or has other than a document hold at the time the ADCD was built would not be added to the ADCD. The following PUT levels may be minus PTFs that were open at build time. Also some functions may be better than the PUT level due to the addition of RSUs and individual PTFs. In general the following is valid.

• All functions of the base z/OS 3.1 May 2024 Edition are at PUT2403 / RSU2403
• All functions of the CICS TS 5.6 are at PUT2403 / RSU2403.
• All functions of the CICS TS 6.1 are at PUT2403 / RSU2403.
• The functions of the DB2 12 base are at PUT2403 / RSU2403.
• The functions of the DB2 13 base are at PUT2403 / RSU2403.
• All functions of the IMS 15.1.0 are at PUT2403 / RSU2403.
• IBM Z Monitoring Suite V1.3.0 is at PUT2403 / RSU2403.

Back to Table of Contents

The use of the z/OS and z/VM® IBM Software stacks (also known as ADCD) for zPDT systems are restricted to qualified Partner Plus Independent Software Vendors (ISVs) who are active participants in the IBM Z Developer Discount Program (zDD) and are licensed to use the z Personal Development Tool (zPDT) system.

The IBM Software stacks and associated downloads are licensed to the specific system by zPDT machine type/model serial number and cannot be transferred to any other machine. The Programs provided in the IBM Software stacks and associated downloads, are owned by IBM or an IBM supplier, and are copyrighted and licensed, not sold. Use of the products provided in the IBM Software stacks and associated downloads, are subject to the terms and conditions of the IBM Customer Agreement (ICA) - Attachment for Developer Discount - z System, and associated Addendum, the individual product licenses, and the associated Application Developers Controlled Distribution (ADCD) License Agreements for each IBM Software stack (z/OS, z/VM).

Use of the software included with the IBM Software stacks on any other system or software emulator is strictly prohibited and is in violation of the terms and conditions of the ADCD License agreements and the z System Developer Discount offering.

Back to top